Santo Domingo 24°C
Automotive

Two V8-Powered Porsche 911s Challenge Tradition at SEMA 2026

A 1978 Porsche 911 SC with an Italian-built V8 and a 2007 911 GT3 equipped with a Chevrolet LS2 engine showcased two very different approaches to performance customization at the Las Vegas automotive trade show.

| 4 min read

Two heavily modified Porsche 911s attracted attention at the 2026 SEMA Show in Las Vegas after abandoning one of the model’s most recognizable engineering characteristics: its rear-mounted flat-six engine. Instead, the cars displayed by Japanese lubricant company ENEOS featured two very different V8 powerplants, one developed from Ferrari and Maserati engineering and the other from General Motors.

The projects were built by automotive creators Jimmy Oakes and Faruk Kugay, with each taking a different direction. Oakes transformed a classic 1978 Porsche 911 SC into a widebody custom car known as the Porrari, while Kugay converted a 2007 Porsche 911 GT3 into a dedicated drift machine.

ENEOS presented the two vehicles as part of its participation in SEMA, one of the major annual events for the automotive aftermarket and performance industry. The cars appeared in separate areas of the Las Vegas Convention Center, reflecting their different roles and engineering approaches.

A 1978 Porsche 911 SC with a Ferrari-Maserati V8

Jimmy Oakes’ Porrari combines a classic German sports car with the F136 V8 developed by Ferrari and used in Maserati models, including the Quattroporte. The engine features a flat-plane crankshaft, an arrangement associated with high-revving performance engines.

Fitting the V8 into the 911’s compact rear-engine compartment required extensive fabrication. The build uses a Link ECU G5 Voodoo Neo 6 engine management system, custom exhaust headers and individual throttle bodies adapted from components associated with the BMW M3’s S65 V8 engine.

According to ENEOS, the engine is configured to reach an 8,000-rpm rev limit. Its power is transmitted through a Porsche 996-generation 911 gearbox, connected using a Kennedy Engineered Products bellhousing and a custom clutch and flywheel.

The mechanical conversion is matched by extensive bodywork. Originally a narrow-body 911 SC, the car received custom metal widebody fenders, a carbon-fiber roof panel and a reinforced body structure. Its suspension was also reworked with Stance Suspension coilovers, while four-piston Porsche Boxster Brembo brakes provide stopping power.

Its Guards Red finish, 17-inch Volk Racing VRX-10 wheels and Japanese-inspired detailing reflect Oakes’ intention to combine European performance engineering with Japanese tuning culture. The name Porrari captures the unusual combination of Porsche and Ferrari-derived mechanical components.

Faruk Kugay’s 911 GT3 gets a 6.0-liter Chevrolet V8

The second project takes a more competition-focused approach. Faruk Kugay’s 2007 Porsche 911 GT3, part of the 997 generation, now uses a naturally aspirated 6.0-liter Chevrolet LS2 V8 producing 458 horsepower, according to ENEOS.

The car has already undergone a major transformation. Originally acquired as a damaged body shell, it was rebuilt at Kugay’s DEVSPEED workshop and initially fitted with a Subaru STI EJ25 boxer engine. That configuration was presented at an earlier SEMA event in 2023.

The latest conversion replaces the Subaru four-cylinder with the LS2 V8, fitted with LS3 cylinder heads and a dry-sump lubrication system. A Chavis Performance & Engineering installation kit helped accommodate the engine, while a Porsche 996 Turbo transmission handles power delivery.

One of the most distinctive elements is the custom exhaust system. Designed with German engineer Christian Koegler of Maisteer, it features CNC-bent header tubes and fabricated stainless-steel collectors. Parts of the exhaust are visible above the engine compartment, making the conversion especially apparent from outside the car.

The GT3 also features a VAD Design GT3R widebody conversion, a Wisefab front steering-angle kit, custom suspension components and a hydraulic handbrake. Its 18-inch Rotiform wheels and competition-oriented setup reflect its primary purpose: drifting rather than conventional road driving.

Two engine swaps, two different performance philosophies

Although both vehicles use V8 engines, their objectives are not the same. Oakes’ Porrari is a highly individualized classic-car project built around the character of an Italian-derived engine and a Japanese-inspired visual identity. Kugay’s GT3, meanwhile, is designed to withstand the demands of competitive-style drifting.

The distinction is also evident in their SEMA appearances. Oakes’ car was displayed at the ENEOS pop-up booth within the RAYS Wheels takeover in the Silver Lot. Kugay demonstrated his LS2-powered GT3 at the Optima driving exhibition in the Bronze Lot, giving visitors an opportunity to see the car in action.

Both builds illustrate the scope of the aftermarket industry, where established sports-car platforms can be re-engineered around engines and components from different manufacturers. They are independent custom projects, not factory Porsche models or official production variants.

Why the Porsche 911 V8 conversions stand out

The Porsche 911 has traditionally been associated with its rear-mounted, horizontally opposed six-cylinder engine. Replacing that configuration with a V8 changes the car’s mechanical identity and requires substantial work involving engine mounts, cooling, exhaust routing, transmission compatibility and weight distribution.

These two builds demonstrate different ways of approaching those challenges. The Porrari prioritizes a distinctive combination of classic styling and high-revving Italian engineering, while Kugay’s GT3 uses American V8 power and specialized chassis modifications for drifting.

For enthusiasts, the projects also highlight how the modern tuning scene brings together German sports-car design, Japanese motorsport influences, Italian engine technology and American performance hardware. More details and technical specifications are available in ENEOS’ official presentation of the two Porsche 911 builds.

Share this article
Facebook X LinkedIn WhatsApp Email